Ag Leader ParaDyme and GeoSteer unlock Proceedure - Manual

Entering ParaDyme/Geo Steer unlocks:
Entering ParaDyme and GeoSteer unlocks can be a bit confusing. Difficulties can arise when trying to
determine when, where, and how to generate the code. This document will show what to expect when
an unlock is ordered, how to generate unlock codes, and where to enter them.
When unlocks are ordered from the parts catalog the order request is sent to the Auto Farm/Novariant
online store. When this order is entered into the store it may take up to 48 hours to be processed and
delivered to the proper steering system. This is done via cell. Keep in mind it is crucial when ordering
ParaDyme and GeoSteer unlocks to put the correct serial number in the order. This is because the
unlocks are unique and cannot be transferred from one steering system to another.
When conducting a remote session through CBS we can see a blue Generate Feature Code button. Click
on the blue button associated with the desired feature code. This will bring up the Feature Code screen
where the code to enter into the ParaDyme/GeoSteer Feature screen is listed. When the Generate
Feature Code button has been selected the clock starts for unlocks with a time limit, such as Ready
Connect unlocks.
Note: If the Feature Code is not generated within 90 days the button will become In-Active.
When in the feature code screen, either write down the code or if using CBS to enter the code simply
highlight the feature code and copy.
Note: If system does not acquire GPS signal feature code will be “Unavailable” until signal is received.