Ag Leader ParaDyme Cell Modem Booster Kit Installation User Manual

Page 23

Advertising
background image

Hardware Installation Manual

17

Cell Modem Booster Installation Procedure

25. Connect the two coax cables and the power cable to the Cell Booster as follows:

ANT. = Coax towards antenna

PHONE = Coax towards GPS receiver

POWER = Power cable

26. Route the cables through the rubber grommet as shown.

Figure 2-23 Route Cables

27. Connect the two coax cable and single power cable to the Cell Booster. Route the cables as shown and secure to the holes

in the bracket using cable ties. Secure the power cable connector along the top of the coax cable using a cable tie.

Figure 2-24 Connect Cables to Cell Booster

Advertising