AirSep MN179-1 B - Manual (Page 35)

MN179-1 _ 02/14 AirSep Corp. - FreeStyle 5 Service Manual Rev B
Figure 5.24 Figure 5.23
After replacing the unit’s compressor, you must reset the hour meter.
(Refer to instructions for reading and recording hours in the CD Kit P/N KI406-1)
5.6 Product Manifold Replacement
1. Remove the PSA system per Section 5.4.
2. Disconnect the tubing from the barb on the product manifold.
Figure 5.22
3. Remove the tie wraps that bundle the solenoid valve wire together.