AirSep MN179-1 B - Manual (Page 36)

MN179-1 _ 02/14 AirSep Corp. - FreeStyle 5 Service Manual Rev B
Figure 5.25
4. Loosen and remove the center bolt from the PSA assembly using a 5/32”
Allen wrench.
5. Holding sieve beds in place, gently pull upward on the product manifold to remove.
Keep tubing assembly in place.
6. Align new product manifold with the outlet of the sieve beds, and gently push
manifold down into place.
7. Reconnect tubing to new product manifold.
8. Place center bolt through product manifold and tighten to 15 in-lbs.