Audiovox PAV2000DTV - Manual (Page 14)

13
Connecting to Power & Multi Channel AV Control Unit System
Power Connection to Head Unit
The illustration shown below depicts a typical power connection though the actual connection
may vary depending on manufacturers (refer to the documentation supplied with the equipment
to be connected). If the connection is not properly made, the unit may sustain unexpected
damage.
1. Connect the Red wire (1) to ACC Power.
2. Connect the Yellow wire (2) to the Battery (+).
3. Connect the Orange/White wire (3), to the Dash Light wire.
NOTE: If the Orange/White wire is not connected to the head unit’s front panel will not
be illuminated.
4. Connect the Blue/White wire (4) to an Optional Power Amplifier power control terminal.
5. Connect the vehicles Antenna Power wire (motorized or film-type) to head unit’s Blue
Auto Antenna wire (5).
6. Connect the Orange wire (6) to the Optional Backup Camera.
7. Connect the Pink wire (7) to the Optional Telephone Mute wire.
8. Connect the Brown wire (8) to the Parking Brake.
NOTE: If the Brown wire is not connected to the Parking Brake, video will not be
displayed on the screen.
9. Connect the Black wire (10) to Ground.