Audiovox PAV2000DTV - Manual (Page 44)

43
Audio
Within the Audio menu, the following features can be adjusted: Dolby Digital, DTS, MP3/WMA,
and CD/VCD. Use the directional arrows and to choose the desired selection. Use the
directional arrows and to between digital and analog out. Use the ENTER button to adjust
the settings. The Analog output can be set for 2-Channel and 6-Channel Output. The digital
output can be set for PCM, RAW, or OFF.
More Audio Settings
Within the More Audio Menu, the following features can be adjusted: Speaker Setting, Speaker
Level, Speaker Delay, Dynamic Range Compression Decompression, Prologic and Pink Noise.
Use the directional arrows and to choose the desired selection. Use the directional arrows
and to adjust the settings.
Speaker Setting
Press the ENTER button to cycle the Speaker Setting between two modes: Center and
Subwoofer. To select a feature, press the direction button and "Yes" and "No" will appear
on the screen. Use the directional arrows and to select either yes or no.
•
"Yes": The audio output of the Center and Subwoofer speakers will be separated.
Based on the 5.1 CH decoder. A separate Center or Subwoofer speaker is
necessary.
•
"No": The audio output of the Center and Subwoofer speaker will be sent to Front
Rear speakers. This feature should be used when the system does not have a
separate Center or Subwoofer speaker.