Audiovox PAV2000DTV - Manual (Page 30)

29
SYSTEM OPERATION
Turning The System Power ON/OFF
To turn the system power ON, press and release the POWER button. The monitor will be
vertically positioned when pressing Open/Close button.
Pressing and releasing the Open/Close button can also turn ON the system power.
To turn the system power OFF, press and hold the POWER button again for 2 seconds. The
monitor will automatically close when the unit is powered OFF.
Opening The Monitor
Press the OPEN/CLOSE button to open the monitor.
Closing The Monitor
1. Hold the upper left & right side of the monitor parallel with the front of the unit as shown
in the picture below.
2. Press the OPEN/CLOSE button or POWER button for 2 seconds or longer and the
monitor will automatically close.
NOTE:
• If the monitor is not parallel to the front of the unit (the monitor is angled to the
left or the right) the monitor cannot be closed. A beep tone will alert the user to
the problem.
• If the OPEN/CLOSE button is pressed while radio or video is on, the monitor
will close, and sound will still be audible. When pressing power button for 2
seconds, the sound and power will be “OFF”.