Audiovox PAV2000DTV User Manual
Page 34
33
3. Use
the keys and place the cursor (Yellow Bar) on Color System and press the
ENTER key. The figure shown below will appear on the display.
4. With the cursor placed on the Color System feature, press the ENTER key to switch
between NTSC and PAL modes. When there are no keys are pressed after 5 seconds
or if the SYSTEM MENU button is pressed, the OSD menu will disappear. When no
key is pressed for 5 seconds, the SYSTEM MENU will disappear.
5. Press the ENTER key for 2 seconds to return to the previous menu.
6. Repeat the above previous steps to adjust the Navigation, Auto Dimmer and Beep Tone
features
Initial Setting - (Adjust TV System)
1. Press the SYSTEM MENU button and select the Initial Setting feature.
2. Use
the keys and place the cursor (Yellow Bar) on Adjust and press the ENTER
key.
3. Use
the keys and place the cursor (Yellow Bar) on TV and press the ENTER key
as shown in the figure below.