Audiovox PAV2000DTV - Manual (Page 49)

48
Display
To access the Display Feature of the unit, press the DISPLAY button (the number 3 button on
the remote control) for 2 seconds. The first time the button is pressed, the track elapsed time
and time to end of the disc is displayed on the screen. Pressing the button a second time
displays all of the information as shown in the figure above. Pressing the button a third time will
remove the display info from the screen.
Repeat
The Repeat feature allows for continuous viewing or listening of a track or disc. To access the
Repeat feature, press the Repeat button (the number 1 button on the remote control) for 2
seconds. For DVD, each time the button is pressed, the screen will display the Repeat
features as follows:
• OFFÆRepeat ChapterÆRepeat TitleÆShuffle.
For CD audio, each time the button is pressed, the screen will display the Repeat features as
follows:
• Repeat DiscÆShuffleÆOff.
A-B Repeat
The A-B Repeat feature allow for the repeating of a section between two specific points. To
access the A-B repeat feature, press the A-B repeat button (number 2 button on the remote
control) for 2 seconds and follow the steps detailed below:
•
Press the A-B Repeat button during play at the point where repeat play is to start
(A).
•
Press the A-B Repeat button during play at the point where repeat play is to be
concluded (B).
•
Play will continuously repeat between the selected A and B points.
•
To return to normal play, press the A-B Repeat button once and "OFF" is displayed.
NOTE: In CD Changer Mode, this button function is achieved by Random Playback.