Audiovox PAV2000DTV User Manual
Page 32
31
5. Press the ENTER key for 2 seconds to return to the previous menu. When there are no
keys are pressed after 5 seconds or if the SYSTEM MENU button is pressed, the OSD
menu will disappear.
Audio Control
1. Press the SYSTEM MENU button on the remote control until the monitor displays the
figure shown below.
2. Use
the keys and place the cursor (Yellow bar) on Audio and press the ENTER
key.
3. Use the keys and place the cursor (Yellow bar) on the item feature that needs
readjustment (Ex. Tone, Volume). Press the ENTER key to make the desired selection
as shown in the picture below.
4. Use the
keys and place the cursor (Yellow bar) on the item that needs to be
adjusted (Ex. BASS, MID, TREBLE). Press the ENTER key to make the desired
selection.