Audiovox PAV2000DTV - Manual (Page 23)

22
CONTROLS AND INDICATORS
Front Panel (With the Display Closed)
1. Volume Up/Down buttons
This button is used to increase/decrease the Audio Volume.
2. Tilt button
Momentarily press and release this button to adjust the angle of the TFT LCD panel with 3
steps. When this button is pressed and held for 2 seconds, the TFT LCD panel moves 2
steps backward & 1 step to forward.
3. Open button
This button is used to Open and Close the TFT LCD panel.
4. Reset button
This button is used to return the unit to the original factory settings (Initial Mode) if the unit
fails to operate properly.
NOTE: If the unit still fails to operate properly after the Reset button has been pressed,
contact your local Audiovox dealer for assistance.
5. Joystick
The joystick is used to choose all directional functions (UP/DOWN/LEFT/RIGHT). Once a
selection has been made using the joystick, press Enter to confirm the selection.
6. Remote IR Sensor
The Remote IR Sensor is used to receive infrared signals from the remote control.
7. Power/Mode
The Power/Mode button is used to turn the unit ON and OFF. To turn the unit OFF, press
and hold the button for 2 seconds. The Power/Mode button can also be used to switch
between AV1, AV2, DVD, Radio and TV modes.