EOTech LWTS Light Weapon Thermal Sight - Manual (Page 6)

iv
WARNING
When using the LWTS in-line with a day optic
(e.g., CCO, RCO), normal procedure is to place
the LWTS in CLIP ON mode. If using STAND
ALONE mode while in a clip on configuration,
ensure that WFOV is selected. Using NFOV in
this instance will induce an error in the aiming
function of the day optic, and LWTS display
symbology (including the Main Menu) will not be
visible to the operator.
CAUTION
Do not ship or store the LWTS with batteries
installed.
CAUTION
Pointing the LWTS at the sun (even when
powered off) without the lens cover installed may
damage internal imaging components.
CAUTION
Use of acetone or gun cleaning agents containing
perchloroethylene or methylene chloride may
permanently damage the LWTS system.