EOTech LWTS Light Weapon Thermal Sight - Manual (Page 70)

3-6
3.3 CORRECTIVE MAINTENANCE (Continued)
Figure 3-1. Adjusting Throw-Lever Tension.
3. Test each adjustment by attempting to mount the LWTS
to the weapon rail per section 2.3.
Objective Lens Cover / Straps Replacement
1. Review Figure 3-2 to gain familiarity with components
referred to in this procedure.
Figure 3-2. Replacing Objective Lens Cover / Straps.
LOCKNUT
OBJECTIVE
LENS COVER
OBJECTIVE
COLLAR
LENS COVER
STRAP