EOTech LWTS Light Weapon Thermal Sight - Manual (Page 72)

3-8
3.3 CORRECTIVE MAINTENANCE (Continued)
Objective Collar Replacement
1. Remove objective lens cover straps (page 3-6).
2. Using thumbs, push and roll the eyelets of the objective
collar up and out of the objective collar retaining groove.
Figure 3-3. Replacing Objective Collar.
3. Work the objective collar over and off the objective focus
ring.
4. Slide the replacement objective collar over the objective
focus ring.
5. While pushing on the eyelets, work the objective collar
past the objective focus ring until it seats in the objective
collar retaining groove.
6. Reinstall the objective lens cover straps (and lens cover)
(page 3-6).
RETAINING
GROOVE