ididit Retrofit Steering Column: 1978-79 Ford Truck - Manual (Page 6)

4
Wheel Installation:
Make sure your road wheels are
pointing straight forward and
your column and all mounts are
completely secure. Next install your
OEM wheel with all of the original
components or add an aftermarket
wheel with an adaptor. Torque
wheel nut to 35lbs.
Final Check:
Now that your steering column, mounts, wheel, knobs and handles
are installed you can now check your turn signals and flasher lights.
Finally check your horn to see that it honks as it should.
After removing all items from the
package, assemble the knobs onto
the levers. The tilt lever (shorter of the
two levers) goes on the left side of the
column in the hole closest to the dash.
The column has a threaded hole that this
lever threads into.
The turn signal lever (longer of the
two levers) goes on the left side of the
column in the hole closest to the driver.
The column has a threaded hole that this
lever threads into.
Knobs & Levers:
Your installation is now complete!