ididit Retrofit Steering Column: 1974-77 Ford Bronco - Manual (Page 2)

(A) Column
(B) Wiring Plugs with Terminals
(C) Instructions & Dress Up Kit
(Dress Up Kit installed on this column)
INDEX
REMOVAL.................................................................... 1 & 2
INSTALLATION OF COLUMN..........................................3-5
ELECTRICAL INSTRUCTIONS...........................................3
INSTALLATION OF KNOBS & LEVERS..............................5
WHEEL INSTALLATION......................................................5
These are the components that come with the column.
(Paintable Steel column pictured above)
We will work through this installation using all the above parts. For
instruction purposes we will assume the vehicle is all original and
uses the OEM harness.
(B)
Ima
ges or e
xamples in this booklet may var
y fr
om y
our specific installa
tion.
(A)
(C)
Ima
ges or e
xamples in this booklet may var
y fr
om y
our specific installa
tion.
Note: A 1974-75 Bronco will require a NEW 3/4” 36 half rag joint
(Part Number: 3000383400) to connect to the OE Rag Joint.