ididit Column Drops/Underdash Mount: 1976-86 Jeep CJ5 & CJ7 Dash Mount User Manual
ididit For the car
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI • PH: 517-424-0577 • FAX: 517-424-7293 • ididitinc.com
Instruction #: 8000010270
REV 12/12
1976-86 Jeep CJ Tilt Dash Mount Installation Instructions
For Part #’s 2312600051
The original 1976-86 Jeep CJ Series vehicles had two different mounting systems for holding the steering column
to the dash. If your Jeep originally had a straight column (non-tilt) you will use your OE mount. If you originally
had a tilt steering column, you will need this bracket to mount the ididit column in place of the original.
Installation:
First, bolt the bracket to the dash using the
original bolts. Put the bolts through the
holes marked “A” in the bracket.
Second, place the column in the bracket
and using the 5/16-18 bolts and washers
provided, attach the steering column to the
bracket using the “B” mount locations.
B
Face towards firewall
A
A
This side is up
Face towards driver
Face towards driver