ididit Floor Mount: 1967-69 Mustang Floor Mount - Manual

PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI • PH: 517-424-0577 • FAX: 517-424-7293 • ididitinc.com
Instruction #: 8000010216 REV 12/12
1967-69 Mustang Floor Mount Installation Instructions
For Part #’s 2400010210, 2400010410, 9201076085, 9201076084,
1967-69 Mustang Floor Mount:
First slide the clamp up the column. You
may want to wrap tape around the bottom
of the column so you don’t scratch it during
installation. Next, slide the metal Floor Mount
onto the column with the tabs facing upward.
Then slide the gasket onto the column. Once
you have your column in place tighten the
Floor Mount & Gasket to the floor. You can
then tighten the clamp around the column and
the Floor Mount tabs.
*PLEASE NOTE: The enclosed floor mount has a “hot dip” black oxide finish.
It would be important to put a permanent finish on it before you install this floor mount.