Serial configuration settings – Avaya AP-6 User Manual
Page 173
Management
Avaya Wireless AP-4/5/6 User’s Guide 4-75
Serial Configuration Settings
The serial port interface on the AP is enabled at all times. See
for information on how to access the CLI
interface via the serial port. You can configure and view following
parameters:
Setting
Description
Baud Rate
Select the serial port speed (bits per
second). Choose between 2400, 4800,
9600, 19200, 38400, or 57600; the default
Baud Rate is 9600.
Flow Control
Select either None (default) or Xon/Xoff
(software controlled) data flow control.
NOTE:
To avoid potential problems when communicating
with the AP through the serial port, Avaya
recommends that you leave the Flow Control
setting at None (the default value).
Serial Data Bits
This is a read-only field and displays the
number of data bits used in serial
communication (8 data bits by default).
1 of 2