Avaya AP-6 - Manual (Page 180)

Filtering
4-82 Avaya Wireless AP-4/5/6 User’s Guide
8. Reboot the AP. When the AP reboots it receives the new
configuration information and must reboot one additional time. If a
Syslog server was configured, the following messages can be
observed on the Syslog server:
— AutoConfig for Dynamic IP
— TFTP server address and configuration filename
— AutoConfig Successful
Filtering
The Access Point’s Packet Filtering features help control the amount of
traffic exchanged between the wired and wireless networks. There are
four sub-categories under the Filtering heading.
• Ethernet Protocol
• Static MAC
• Advanced
• TCP/UDP Port
Ethernet Protocol
The Ethernet Protocol Filter blocks or forwards packets based on the
Ethernet protocols they support.