Avaya AP-6 - Manual (Page 427)

RADIUS Commands
Avaya Wireless AP-4/5/6 User’s Guide A-81
Figure A-16. Result of “show radius” CLI Command
Configure RADIUS Accounting server
[Device-Name]> set radacctbl <index> status <enable> seraddrfmt
<ipaddr or name> ipaddr <RADIUS IP address or name> port <user
defined> ssecret <user defined> responsetm <1 to 4 seconds>
maxretx <1 to 10 times>
[Device-Name]> show radacctbl