Avaya AP-6 - Manual (Page 213)

Bridge
Avaya Wireless AP-4/5/6 User’s Guide 4-115
The Storm Threshold parameters allow you to specify a set of thresholds
for each port of the AP, identifying separate values for the number of
broadcast messages/second and Multicast messages/second.
When the number of frames for a port or identified station exceeds the
maximum value per second, the AP will ignore all subsequent messages
issued by the particular network device, or ignore all messages of that
type.
• Address Threshold: Enter the maximum allowed number of
packets per second.
• Ethernet Threshold: Enter the maximum allowed number of
packets per second.
• Wireless Threshold: Enter the maximum allowed number of
packets per second.
Intra BSS
The wireless clients (or subscribers) that associate with a certain AP form
the Basic Service Set (BSS) of a network infrastructure. By default,
wireless subscribers in the same BSS can communicate with each other.
However, some administrators (such as wireless public spaces) may wish
to block traffic between wireless subscribers that are associated with the
same AP to prevent unauthorized communication and to conserve
bandwidth. This feature enables you to prevent wireless subscribers
within a BSS from exchanging traffic.