Avaya AP-6 - Manual (Page 433)

SNMP Commands
Avaya Wireless AP-4/5/6 User’s Guide A-87
Syntax Examples
Change SNMP Passwords
[Device-Name]> set snmprpasswd <New Password> (SNMP read
password)
[Device-Name]> set snmprwpasswd <New Password> (SNMP read/write)
[Device-Name]> set snmpv3authpasswd <New Password> (SNMPv3
authentication password)
[Device-Name]> set snmpv3privpasswd <New Password> (SNMPv3
privacy password)
Configure Management Interfaces
[Device-Name]> set snmpifbitmask <(see Table A-3 )>
Choose from the following values:
Table A-3 Interface Bitmask Values
Interface Bitmask Description
0 or 2 = disable (all interfaces) All management channels disabled
1 or 3 = Ethernet only Ethernet only enabled
4 or 6 = Wireless only Wireless only enabled
5 or 7 = all interfaces All management channels enabled