Avaya AP-6 - Manual (Page 283)

Link Test
Avaya Wireless AP-4/5/6 User’s Guide 5-15
Link Test
This tab displays information on the quality of the wireless link to clients
and other APs in the Wireless Distribution System. During a Link Test, the
Access Point and the selected device exchange a series of packets to
test the strength of the connection. The devices start by exchanging
packets at the 11 Mbits/sec rate but fall back to the slower rates if
necessary.
NOTE:
This feature is not available for an 802.11b/g AP. Also, this feature
is not available if you are using a non-Avaya Wireless client with an
802.11b AP.
Follow these steps to perform a Link Test:
1. Open the Remote Link Test screen.
2. Click Explore.
Result: A list of detected stations will appear. If the list does not
appear automatically, click Refresh.