Avaya AP-6 - Manual (Page 347)

A
Avaya Wireless AP-4/5/6 User’s Guide A-1
The Command Line
Interface
In This Appendix
This section describes the AP’s Command Line (CLI) Interface. CLI
commands can be used to initialize, configure, and manage the Access
Point.
CLI commands may be entered in real time through a keyboard or
submitted with CLI scripts. After entering commands, press the Enter key
to execute the command.
The CLI is available through both the Serial Port interface and over the
Ethernet interface using Telnet.
NOTE:
All CLI commands and parameters are case-sensitive.