Innovate Motorsports OT-2 Quick Start Guide - Manual

Selecting Channels to Display
1. Launch LogWorks from your iPhone or iPod touch.
2. Press the LogWorks tab.
3. On the upper left-hand corner you will see a icon, press it
to enter the configuration screen.
4. The configuration screen has three parameters to configure:
Imperial Units: Allows you
to select Imperial Units or
Metric
Lambda or AFR: If there
is any Innovate
Motorsports A/F meter
connected to the OT-2
you can chose to display
the channels as AFR or
Lambda.
Gauges: Chose which
channel to display on the
gauge. Note: Channels
available for display must
be enabled from the OT-2
tab first.
5. Press Done on the upper right hand corner when done
configuring.
< (10-2303.B)
OT-2
QUICK START GUIDE
The complete instruction manual is on the CD
Order parts, get support, find FAQ answers, and read case
studies at www.tuneyourengine.com
11-0126