Quick Fuel Technology Qfi Electronic Fuel Injection System - Manual (Page 29)

29
To establish a map for the cam, use these steps below:
o Open the DASHBOARD program on the laptop
o Select tab marked “Select”
o Choose VE Table (“VE” = Volumetric Efficiency)
o From popup box, choose VE #4 button
o Close popup box
o Choose the VE Table tab
 Be sure VE Table #4 appears in the right side, lower corner of the VE Table
 Modify the VE table values as needed
For additional assistance in setting up the VE Table, and other areas of the DASHBOARD, we advise
you to consult with a professional EFI tuner.
___________________________________________________________________________________
While we have tried to make this installation guide/instruction manual easy to understand and follow,
we realize that you may have questions. Please contact the Quick Fuel Technology Technical Service
Department. We are available at 270-793-0900, Monday-Friday, 8:00 AM to 5:00 PM Central Time to
assist you.