SIGMA ROX 10.0 GPS - Manual (Page 26)

page 26
Training functions
Training with the RoX 10.0 gps
www.sigmasport.com ROX 10.0
ROX 10.0
5.6 Training functions
5.6.1 Zoom function in Track View and Altitude View
press the and buttons to select the optimum zoom setting.
5.6.2 Same track back function
with the ‘same track back’ function, the RoX 10.0 gps safely returns you to
your start location.
5.6.3 Track found message
The ‘track found message’ appears if you ride along a previously loaded track.
5.6.4 Off-track alarm
The ‘off-track alarm’ helps you stay on route and is triggered if you leave it.
5.6.5 Wrong direction message
The RoX 10.0 gps detects if you are riding in the wrong direction and indicates
this.
If a tour has been incorrectly stored (start and end points mixed up), you can use
the ‘Reverse track’ function (see section ‘‘5.5.1 Using the short menu to select
training settings’’) to directly reverse the tour on the RoX 10.0 gps.
Note
‘Reverse track’ must be activated before a track is loaded to reverse the track!
5.6.6 Waypoint alarm
The waypoint alarm reminds users that they have reached an interesting
waypoint that was marked in advance.
5.7 Analysis
The analyses for the current tour, stored tours, and total values can be found
under the menu item ‘memory’.