SIGMA ROX 10.0 GPS - Manual (Page 48)

page 48
Firmware update
settings
www.sigmasport.com ROX 10.0
ROX 10.0
10.11 Firmware update
Caution
Firmware updates reset all values to zero and all settings to factory status.
before starting the firmware update, store your tours and relevant data on
your pC.
To conduct a firmware update:
1. Use the micro Usb cable to connect your RoX 10.0 gps to your pC then
press
ENTER
on the RoX 10.0 gps.
2. start the program ‘Data Center’ on your pC.
3. In Data Center, select the Firmware Update option and follow the on-screen
instructions. Further information can be found in the Data Center instruction
manual.
After the update, the RoX 10.0 gps switches off.
10.12 Factory settings
Caution
Resetting the RoX 10.0 gps to factory settings resets all values to zero and all
settings to factory status. before restoring the factory settings, store your tours
and relevant data on your pC.
To restore the factory settings:
1. press the and buttons to select ‘yes’ then press
ENTER
.
2. The question ‘Are you sure?’ appears. Confirm that you are sure by pressing
ENTER
.
3. The device is now reset to factory settings.
After the RoX 10.0 gps has reset to factory settings, it switches off.