SIGMA ROX 10.0 GPS - Manual (Page 44)

page 44
Favorites
settings
www.sigmasport.com ROX 10.0
ROX 10.0
− waypoint alarm (waypoints are special points of interest (poI) near the route
that you have marked).
This alarm indicates the distance of a waypoint. you can set the distance (40
m, 80 m, 150 m, off) at which the alarm should be triggered or deactivate it.
− Auto-zoom track (on/off)
10.10 Favorites
Favorites A and b can be filled with functions for the view modes (bikecomputer,
Track View, Altitude View, lap message). you can choose these yourself.
To set you favorites:
1. start by pressing the and buttons to choose whether to specify the
functions for favorites A or b then press
ENTER
.
2. press the and buttons to select the view mode (bikecomputer,
Track View, Altitude View, or lap message) then press
ENTER
.
3. In the ‘bikecomputer’ view mode, you can define up to 10 values and their
display positions. press the and buttons to choose the position
(1–10) in which the value should be displayed then confirm your selection by
pressing
ENTER
.
Note
six functions (1A–3b) can be selected in the ‘Track View’, ‘Altitude View’ and ‘lap
message’ view modes.
4. press and to select the function area in the overview then press
ENTER
.
5. you are now shown the relevant functions. press the and buttons
to select the desired functions then press
ENTER
.
6. your selection is confirmed and a tick appears.
7. you now automatically move to step 3. select the next position and repeat
steps 4 to 6.
8. press the
BACK
button to select the view mode again (step 2) and determine
the positions and functions for this.
The list below contains all the selectable functions that can be added to your
favorites: