Sper Scientific 850024 Hot Wire Anemometer SD Card Logger - Manual (Page 10)

10
SETUP MODE
The advanced Setup Mode allows you to customize the
following meter preferences and defaults:
 Real Time Clock
 Decimal Type
 Auto Power Off
 Touch-Tone
 Thermometer Type K/J
 Temperature Units
 Sampling Time
 SD Memory Card Format
Note…
The setup functions can be performed under any parameter
but not while utilizing the datalogger function. Once
selections are saved, the meter will default to the selected
preferences when the meter is turned off and on again.
Once a selection is saved, the meter automatically
advances to the next setup function (i.e., after setting the
real time clock, the meter will automatically enter the
decimal type setup function).
1. Press POWER to turn the meter on.
2. Press SET for 2 seconds or longer to enter Setup Mode.
3. Press NEXT to cycle through the setup functions.
Note…
Press ESC to exit Setup Mode. The meter will return to
Normal Mode.