Sper Scientific 850024 Hot Wire Anemometer SD Card Logger - Manual (Page 19)

19
DATALOGGER
Preparing the Datalogger
1. Insert the SD card into the SD card socket on the
bottom of the meter, ensuring that the front of the SD
card faces the back of the meter.
2. Format the SD card as needed (see page 13).
3. Set the real time clock if using the meter for the first time
(see page 11).
4. Set the decimal type if using the meter for the first time
(see page 11).
Auto Datalogging
1. Set the sampling time to ≥ 1 second (see page 13).
2. Press REC. “REC” will appear on the LCD.
3. Press LOGGER. “REC” will flash on the LCD and the
alarm will sound while the measurement data and time
information are saved to memory.
4. To pause datalogging, press LOGGER. The meter will
temporarily stop recording and “REC” will stop flashing
on the LCD. Press LOGGER again to resume
datalogging. “REC” will flash on the LCD.
5. To finish datalogging, press LOGGER to pause
datalogging, then press REC for 2 seconds or longer.
“REC” will disappear from the LCD to indicate that
datalogging has ended.