Aiwa XR-DV3M - Manual (Page 53)

En
ENGLISH
51
GENERAL
CARE AND MAINTENANCE
Occasional care and maintenance of the unit and the software
are needed to optimize the performance of your unit.
THE UNIT
Shipping the unit
The original shipping carton and packing materials come in handy.
For maximum protection, re-pack the unit as it was originally
packed at the factory.
Where to set the unit
The picture and sound of a nearby TV, VCR or radio may be
distorted during DVD play. In this case, position the unit away from
the TV, radio or VCR, or turn off the unit after removing the disc.
Keeping the surface clean
Do not use volatile liquids, such as insecticide spray, near the
player. Do not leave rubber or plastic products in contact with the
unit for a long period of time. They will leave marks on the surface.
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent solution. Do not use
strong solvents, such as alcohol, benzene or thinner, as these
might damage the surface of the unit.
To obtain a clear picture
This DVD stereo system is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn down,
the picture quality will be poor. Regular inspection and maintenance
are recommended after every 1,000 hours of use. (This depends
on the operating environment.)
For details, please contact your AIWA dealer.
DISCS
Handling discs
Do not touch the playback side of a disc.
Hold discs by the edges so that fingerprints will not get on the
surface.
Do not stick paper or tape on a disc.
Care of discs
• When a disc becomes dirty, wipe the disc from the center out
with a cleaning cloth.
• Do not use strong solvents such as alcohol, benzene, thinner,
commercially available cleaners or anti-static spray intended for
analog records.
• After playing a disc, store the disc in its case. Do not leave the
disc in places that are hot or humid.
GENERAL
CUSTOMIZING
DVD SETUP