Flaming River C-10 Chevy Truck Rack and Pinion 1973-87 - Manual (Page 11)

Universal Joint System
1) Loosen the set screws in the rack mounting blocks. – This will allow to you to adjust the pinion angle for proper u-joint
alignment.
2) Install support-bearing mount onto the inner front control arm bolt. (Picture below). Note: The angle of this mount is set for
most applications. Some adjustment may be necessary for the correct angle and u-joint alignment.
73-87 C-10 Truck
Power Steering Rack and Pinion Cradle Kit
04/22/10
10