Flaming River C-10 Chevy Truck Rack and Pinion 1973-87 - Manual (Page 6)

Steering Box and Linkage Removal con’t
2) Remove the two bolts that retain the idler arm to the frame rail.
3) Remove the cotter pins and castle nuts and separate the outer tie rod ends from the spindles.
4) Next remove the steering linkage from the car.
5) If you have power steering remove the lines from your power box, pump and pump brackets.
6) Remove the three bolts that retain the box to the frame rail and remove the box from the car
73-87 C-10 Truck
Power Steering Rack and Pinion Cradle Kit
04/22/10
5