GReddy TURBO KITS: Scion FR-S 2013-14 / Subaru BRZ - Manual (Page 16)

―１４―
(6) Readjust exhaust piping from the Turbine as
needed, then tighten.
(7) Reconnect O2 Sensor and Air Fuel Sensor
harness couplers.
３－1０ Heat Shield Installation
(1) Install the Turbine Bracket A。
※ Temporarily finger tighten。
〈Parts №５７〉
(2) Install the Turbine Heat Shield by sliding the cut
outs over the down pipe hardware as shown in the
photo.
〈Part №４１，５７〉
(3) Tighten the bolts.
３－１１ Compression Tube Installation
(1) Install the Free Rotation Union onto the
Compression Pipe.
※ Use liquid seal when installing the Free Rotation
Union。
〈Part №５，１９〉
№57 M6×8
㎜
№57 M6Ч8
㎜
№41
№19
№5