GReddy TURBO KITS: Scion FR-S 2013-14 / Subaru BRZ - Manual (Page 18)

―１６―
(3) Remove the front bumper bracket and drill out two holes as shown in the diagram.
(4) Reinstall the front bumper bracket, then install the Intercooler using the Intercooler Mounting Spacers
as shown in the diagram.
〈Parts №１０，５２，６０，６１，６２〉
３－1３ Intercooler Piping Installation
(1) Connect the Intercooler Piping to the Intercooler
and check the clearance. Once the pipes have
been connected to the Intercooler, tighten all
hose clamps.
〈Parts №２６，２８，３２，３３〉
１５㎜
５９㎜
８㎜ ８㎜
７φ
７φ
№60 M6×30㎜
№61 M6 Flange
Nuts
№52
№62 M8×15㎜
Be sure to wear proper eye protection when cutting or drilling.
Clean the surface area of any sharp edges and repaint exposed metal.