GReddy TURBO KITS: Scion FR-S 2013-14 / Subaru BRZ - Manual (Page 7)

―５―
２．Removing OEM Parts
Refer to the factory service manual prior to the
uninstallation of OEM parts.
２－１ Disconnect the negative battery terminal.
２－２ Remove the under-cover, front bumper cover.
２－３ Remove the washer tank.
２－４ Remove front bumper reinforcement.
２－５ Remove the exhaust manifold.
２－６ Remove the air clear case assembly.
２－７ Remove oil pan.
２－８ Remove the oil pressure switch.
２－９ Remove engine oil pan (Sub Assembly No2).
２－１０ Remove the intake chamber Assembly to the L
Joint (below the brake booster).
※ Install the 5mm silicon cap to the L-shaped joint pipe.
〈 Part # ２１，４４〉
２－１１ Remove the air cleaner inlet assembly and radiator cover plate.
２－１２ Remove the radiator support sub assembly.
２－１３ Remove the radiator fan, radiator fan shield and radiator reservoir tank..