GReddy TURBO KITS: Nissan 350Z 2003-04 / twin TD05-18G - Manual (Page 11)

Oil Pressure Line Installation
Install the oil pressure line to engine block using provided fittings.
(Part Used #20, 21, 22, 23, 24)
600mm line is for the right side and 800mm line is for the left side.
Exhaust Manifold Installation
1. Remove all factory exhaust manifold stud bolt off from the cylinder head. Install the
provided M10 x 35mm stud bolts on to the cylinder head as shown.
(Part Used #74)
Right Side (Passenger’s Side)
Front of
the engine
Install Stud Bolt
Left Side (Driver’s Side)
Install Stud Bolt
Front of
the engine
2. Install the Exhaust Manifold using provided gasket and hardware.
(Part Used #3, 4, 54, 74)
Left Side (Driver’s Side) Right Side (Passenger’s Side)