GReddy TURBO KITS: Nissan 350Z 2003-04 / twin TD05-18G - Manual (Page 14)

Vacuum hose for Wastegate Installation
Remove the factory engine cover. Locate the
rubber plug on the intake manifold and remove it.
Connect the 5
∅ hose to the intake manifold and
by using the three way fitting and connect the 6 ∅
hose to each of the wastegate fitting.
(Part Used #30, 31, 59)
Suction Pipe Installation
1. Install the Airinx air filter to the Suction pipe S-2 and S-4.
(Part Used #14, 15, 16, 17, 18, 19, 33, 36, 37, 40, 42, 43, 44, 52, 53, 67)
2. Install the S-1 and the S-2 (with AIRINX) to the right (passenger side) turbo inlet using
provided hose and hose clamps and secure the Airinx to the chassis as shown. Bend
the Power steering line over towards the pulley so that the S-2 clears the line.
Bend Away
Airinx
Bracket
3. Install the S-3 and the S-4 (with AIRINX) to the left (driver side) turbo inlet using
provided hose and hose clamps and secure the Airinx to the chassis as shown. Bend
the A/C line toward the engine so that the S-4 pipe clears the line.
Bend A/C
Line
Airinx
Bracket