GReddy TURBO KITS: Nissan 350Z 2003-04 / twin TD05-18G - Manual (Page 13)

Wastegate Installation
Install the provided banjo fitting on to the bottom port of the wastegate. (Top Port is used
for boost controller) Install the wastegate using the provided gasket and hardware as
shown.
(Part Used #2, 73)
Left Side (Driver’s Side) Right Side (Passenger’s Side)
• Double check the clearance between the wastegate and the main engine harness on
the right side (passenger side). Make sure that there is enough clearance to avoid the
harness from getting to hot and melting.
Down Pipe Adapter Installation
Install the down pipe adapter using the provided gasket and hardware as shown.
(Part Used #5, 6, 55, 70, 72)
Exhaust System Installation
Install the catalytic converter and the exhaust
system using the provided gasket and hardware
as shown.
(Part Used #56, 75)