Figure 9, Securing the upper clamp part, Figure 10 – Vaisala HMM100 User Manual
Page 22: Tightening the lower clamp part
Advertising
User's Guide _______________________________________________________________________
20 ___________________________________________________________________ M211024EN-C
3.
Place the clamp to the intended location and secure the upper
clamp part with a screw. See Figure 9 below.
1209-003
Figure 9
Securing the Upper Clamp Part
4.
Place the probe in the clamp.
5.
Tighten the lower clamp part with a screw as shown in Figure 10
1209-004
Figure 10
Tightening the Lower Clamp Part
Advertising