Vaisala HMM100 - Manual (Page 49)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 47
Other Commands
Display Command List
Use the HELP command to display a list of the currently available
commands. If the PASS command has not been used, only the basic
commands are available.
HELP<cr>
Enable Advanced Commands
Use the PASS command to enable the advanced commands.
PASS [passcode] <cr>
where
passcode
= Use "1300" to enable the advanced commands.
Example:
>pass 1300
>
Display the Currently Active Errors
Use the ERRS command to display the currently active error codes. For
troubleshooting active errors, see Table 9 on page 62.
ERRS<cr>
Example (no active errors):
>errs
No errors.
>