High Country Tek emc-3L - Manual (Page 17)

current required for that output is added to the 150mA. For instance, if a dvc7 is driving a 2 independent
cylinders, and the valves for the cylinders require 1.7A, then the total current for the dvc7 module would be
Dvc7 requirements
150mA
(2) valves, 1.7A each 3.4A
Total current 3.55A
Of course, a AGC fuse of 3.55A is not available, use a fuse size near this calculated value.
P/N: 021-00163, Rev. A.0 - for V5.2 Tools Page | 17