High Country Tek emc-3L - Manual (Page 27)

are used to detect an out of range condition on the input. To automatically set the voltage limits click on the
Auto Set Voltage Limits button.
The Invert Output selection will make the program variable value equal to 100%
at MIN Volts and 0% at MAX Volts.
The following subsections give the definition as well as an overview of each of the fields in the Analog Input
screen:
Name:
Variable name used in the application program to access this input’s value as a percentage of the voltage range
or true/false for a digital input and its associated properties.
Range: 16 Characters with no spaces. Valid characters are A-Z, a-z, 0-9, and "_".
Rules: The first character cannot be a number. Compiler keywords or other names already in use are not valid.
A valid example is "Steering".
Min Volts to Center Volts:
Name: Access word for the input between 0 Volts and the Center Voltage
Range: 16 Characters with no spaces. Usable characters are A-Z, a-z, 0-9, and "_".
Rules: The first character cannot be a number. Compiler Keywords or other Names already in use are not
valid. A valid example is "Steer Left".
Center volts to Max volts
Name: Access word for the input between Center Voltage and the Max Volatge
Range: 16 Characters with no spaces. Usable characters are A-Z, a-z, 0-9, and "_".
Rules: The first character cannot be a number. Compiler Keywords or other Names already in use are not
valid. A valid example is "Steer_Right".
P/N: 021-00163, Rev. A.0 - for V5.2 Tools Page | 27