High Country Tek DVC80 - Manual (Page 116)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 116
6.16 DP04 Pendant
With release 4.7 the DVC tools provide support for the DP04 Graphical Display Pendant with Keypad.
The Pendant is approximately 3” wide x 6” high and 1” deep. The DP04 connects to the DVC5/7/10 controller
using the RS232 interface. Backlighting provides for easy reading of the display. The unit has batteries for
power.
Programming the DP04
The DP04 is programmed using the Programming Tool much like you would
program the Graphical Display. The main difference is that instead of
specifying only text as you do for the Virtual Display you select objects from the
DP04 screen Object’s menu and modify the fields of the objects where
appropriate. Refer to the D206 Graphical Display documentation for how to
program the DP04.
The main difference between the Graphical display and the DP04 is that the DP04 supports a subset of the
graphical objects. The Objects menu indicates which objects are supported. The 10 objects supported are
shown below in the Display script window.