High Country Tek DVC80 - Manual (Page 141)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 141
C1 HS OUT 3 F2 HS OUT 9 J3 (+) POWER IN 3
C2 SIG COM F3 HS OUT 10 K1 (+) POWER IN 1
C3 PWR COM G1 HS OUT 11 K2 (+) POWER IN 2
D1 HS OUT 4 G2 PWR COM K3 (+) POWER IN 3
DVC41
5 Pin J1939 connecter (P9)
Pin Function
1 DRAIN
2 **V+ (NC)
3 **V+ (NC)
4 CAN H
5 CAN L
** Power and GND are not supplied
to the CAN Bus by the DVC5
Special Notes:
1. (+) Power IN 1 supplies power to the DVC41 module
and HS OUT 1, HS OUT 2, HS OUT 3 and HS OUT 4.
2. (+) Power IN 2 supplies power to HS OUT5, HS OUT6, HS OUT7,
and HS OUT 8.
3. (+) Power IN 3 supplies power to HS OUT9, HS OUT10, HS OUT11,
and HS OUT 12.
10.7 DVC50 Hardware Connections
DVC50
30 Pin Metri-Pak connector (P16)
Pin Function Pin Function Pin Function
A1 RXD D2 PULSE / ANALOG 2 G3 DIG 2 INPUT
A2 TXD D3 SIG COM H1 (+) 5V POT REF
A3 E1 (+) 5V POT REF H2 ANALOG IN 4
B1 SIG COM E2 ANALOG IN 1 H3 DIG 3 INPUT
B2 SIG COM E3 SIG COM J1 DIG 4 INPUT
B3 SIG COM F1 (+) 5V POT REF J2 DIG 5 INPUT
C1 (+) 5V POT REF F2 ANALOG IN 2 J3 DIG 6 INPUT
C2 PULSE / ANALOG 1 F3 DIG 1 INPUT K1 (+) POWER IN
C3 SIG COM G1 (+) 5V POT REF K2 DIG 7 INPUT