High Country Tek DVC80 - Manual (Page 131)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 131
than the rate in use by the DVC7/10 and the Send Changes button is pressed, the new value will be saved to
temporary memory. If the DVC7/10 is plugged in, it will not be able to communicate with the DVC80 until its
baud rate is changed to match that of the DVC80.
When connected directly to the DVC80 and the detail button is on, a help window appears and the user can
point his/her mouse to each indicator in order to see specific information on programming.
When connected to the DVC5/7/10 and the data-logging button is active, the unit logs J1939 information to a file
at the data log rate. Notice that the detail button cannot be deactivated until data logging is stopped.
The Metric button allows the user to display the data in either Metric units (when the button is in the Up position)
or Standard U.S. units (when the button in the Low position).