Videoswitch Vi600 - Manual (Page 43)

Digital Recorder
36
9.5 Domes
9.5.1 Preset Programming
9.5.1.1 Dwell/Speed/Tour Settings
9.5.1.1.1 Dwell Time
Where a dome supports programmable dwell times in its presets, the dwell time is set here.
9.5.1.1.2 Speed
Where a dome supports programmable pan/tilt/zoom speed in its presets, the dwell time is
set here.
9.5.1.1.3 Include preset in tour
9.5.1.2 Go to Preset
Go to a preset. This is normally performed via a
FN function command, but is also here for
convenience when setting tours and presets.
9.5.1.3 Set Preset
Store the current position as a preset
9.5.2 Tour Programming
9.5.2.1 Dwell/Speed Settings
9.5.2.1.1 Dwell Time
Where a dome supports programmable dwell times in its tours, the dwell time is set here.
9.5.2.1.2 Speed
Where a dome supports programmable pan/tilt/zoom speed in its tours, the dwell time is set
here.
9.5.2.2 Start Programming Tour
Start programming a tour
9.5.2.3 Add preset to Tour
Add a preset to a tour
9.5.2.4 Finish Programming Tour
Finish programming a tour
9.5.3 Protocol Set-Up
9.5.3.1 DOMES-1 protocol (twisted pair)
Specify the type of dome(s) connected to the DOMES-1 twisted pair output