Videoswitch Vi600 - Manual (Page 63)

Digital Recorder
56
Passwords 4 passwords with fully programmable rights
Search modes Date/time search, sweep, event list, incidents
Timers Record, alarm, activity and custom (weekday and
weekend)
Audio Bandwidth Single channel audio, 3.2kHz (optimised for speech)
Microphone input 3.5mm jack, -56dB, 20k Ohms, suits electret microphone
Line input/output 2 phono connectors, -30dB level, 47k Ohms
Audio sensitivity control 30db range, via menu
Alarm inputs 24 inputs, suit to normally open or normally closed volt-free
contacts, inputs mapped
Activity detection 16 x 12 zones, programmable sensitivity
Relay 6 relays, 24Vdc, 200mA max normally open or closed
Alarm/activity response Pull-up full screen display, maximum record rate
Event log 10,000,000 alarm, activity, system and till events
Incident list Up to 10 incidents may be saved onto one CD
Till and bar code inputs 4 RS232 inputs for till and/or barcode reader data
Atomic clock option GPS satellite receiver input to synchronise clock
Watchdog timer In the event of any unexpected condition, the system will
automatically restart
11.5.3 Dome Control
Interfaces RS485 (x2), Rs232 (x2), Up-the-Coax (x16)
Telemetry (coax) BBV
Telemetry (twisted pair) RS485, RS232 and 20mA. Protocols include JVC, VCL,
BBV, Dennard, Sanyo, Samsung, Forward Vision, Mercer,
Molynx/Bewator, Merit-LiLin, Borsatec, Pelco-D
11.5.4 Remote Viewing
PSTN/ISDN (option) Adaptors are available for dial-up remote access
Ethernet 100baseT, TCP/IP, suitable for connection to broadband
router or LAN. Software supplied.
Remote viewing software Vi-Connect or VDM-connect may be used on a PC running
Windows 2000 or Windows XP.